When it comes to cultural difference, the preference for a specific transmission type is an intriguing fact if you look for distinctiveness in similarity. Nearly 96% of Americans favour automatic vehicles. It might seem as manual transmission is past its prime. But that is not how things actually are. Many other regions of the world have developed a love affair with manual transmissions as a result of Europe interest in manual transmission.

What makes a manual transmission so popular? Stick shift or manual transmission driving used to be considered a significant milestone. Driving a car with a manual transmission included carefully releasing the clutch, gripping the stick, and shifting gears in accordance with the engine’s RPMs. The driver engagement makes it more popular among the masses. People get a lot of enjoyment out of changing gears according to speed.

However, there is an important component behind manual transmission success, and it is the clutch. In fact, you can only change gears by pressing the clutch to disengage the engine from the transmission unit.

A clutch works ferociously to offer a smooth driving experience, but it also receives a lot of wear and tear in the process. A car might need a clutch replacement at some point in the future, and it happens early in cases of improper driving habits, especially when a driver just drives a vehicle on half of the clutch.

Whether you have been dealing with clutch problems with your car or not, it is necessary to keep abreast with the information about the clutch of your car, as it is a complete unit rather than an individual component.

Check out the pressure plate and change it if needed

A pressure plate is essential when transferring power to transmission. It completes the job by pressing against the flywheel. However, the pressure plate might lose its efficacy over time and need a replacement to offer you an optimal experience.

In case you have started to experience greater clutch release, it hints at clutch disc replacement. Furthermore, given how long it will take to configure a clutch unit, it would be prudent to change the pressure plates.

Take Throw-out bearing replacement into consideration

Quite complex yet essential mechanism keeps engines running even when a driver changes the gears. A clutch unit possesses a fork that pushes the pressure plate and throw-out bearing so that the clutch disc can rotate freely.

However, the whole process always proves very harsh on these components, and they might get worn prematurely. The damage might be too rapid if there is improper handling and a lack of lubrication most of the time.

It is always time saving to change the throw-out bearing along with the clutch disc when you have to go for a clutch disc replacement at Service My Car.

The slave cylinder might need replacement too

In pressure based clutch units, the slave cylinder performs the duty of disengaging the clutch from the engine. It displaces the pressure placed on the transmission when a driver presses the clutch pedal.

During consistent driving, a slave cylinder goes under a lot of pressure, and there might be a higher probability of leaking when your vehicle becomes a bit older. However, you would not prefer to have a leaking slave cylinder and, of course, problems with your car’s clutch.

Therefore, it is not a big deal to go for the change slave cylinder when you go for a clutch repair or car clutch replacement. However, you can consult with an expert for a professional opinion at Service My Car.

Take care of clutch fluid during a change

Mechanical movement is nothing without lubrication, and so is a clutch unit. If there is a lack of lubrication, your clutch pedal might stick at the bottom when you press it down. Corrosion is a dangerous enemy of the clutch pedal and other components.

However, if you make efforts to prevent corrosion, it will be easier and, most importantly, less expensive than repairing or replacing the part.

While looking for a clutch replacement, you should contact Service My Car because the entire unit will need to be lubricated. However, take care of the lubrication fluid yourself and visit your nearby Service My Car workshop if you find any stiffness while pressing the clutch.

Transmission fluid is also necessary for smooth functioning

When it comes to the clutch transmission system, smoothness is also critical, which comes from the proper lubrication fluid. A manual transmission is a robust unit, yet it requires good lubrication.

It is necessary to drain the transmission fluid and change it. As it may be contaminated with the metal debris and be harmful in the future for internal components.

Therefore, you should be mindful of these components too when you go for a clutch disc replacement.

Though a vehicle considers the clutch disc a critical component that should be replaced because it receives a lot of wear and tear, however, it would be wise to consider other components to mitigate the risk, save time, and, of course, avoid unnecessary expenses.

If you want to replace your car clutch then Service My Car will provide you best car services such as engine repair, engine oil change, battery replacement, wheel alignment and many more at an affordable price.

However, Service My Car offers you comprehensive clutch service under one roof when you book a car service online. Besides, you can order a car repair quote on our website or app.